With the development of glass skills and the need for high-quality society, glass shapes are more and more, in addition to the general four straight sides, there are various arcs or irregular polygons. However, the general double-sided machine or straight-line edging machine can not meet the processing needs of glass edging with special-shaped edges.Shaped glassThe edging machine mainly deals with the edging and polishing of the special-shaped edges of the glass.
Like other edging machines, special-shaped edging machines are also composed of bases, girders and grinding head seats. They require all castings to run at high speed and be stable. The square girders are consolidated and not deformed. The grinding head selects mechanical parts with higher hardness. It can give full play to the processing efficiency of special-shaped edging machine. At the same time, the thickened square tube frame of the conveyor system can increase the weight of the processed glass. The selection of the motor also directly affects the operation of the machine. So, how to choose the right place to install the device after purchasing a special-shaped edging machine?
The selection of the site should be based on the size of the edging machine, and consider that the production line is equipped with the number of other processing machines and the space required for the size. In addition to the space occupied by machinery, sufficient channels need to be reserved, and sufficient "spare space" is reserved to facilitate the placement of original glass and other items.
After selecting the site, you need to prepare the relevant assembly materials for the special-shaped edging machine, the corresponding assembly tools, and install the new circuit and drainage system according to the placement rules. In order to avoid device mistakes and knock damage to the edging machine, professional installation personnel should provide on-site guidance and installation. Before carrying out the edging machine device, first check whether the materials are fully prepared, whether the type and quantity of parts are accurate, and if there are missing or faulty parts, they should be supplied or replaced. It is advocated that unrelated mechanical accessories should not be presented on the site of the device to avoid unnecessary use of parts.
Related News
- Analysis of U-shaped glass in the market
- Signing the U-shaped glass project of Nanjing General shan Junior High School
- Performance and application of curved tempered glass
- Cause Analysis and Control of Stress Spot on Tempered Glass
- Hangzhou Xiangjie tells you how to install U-shaped glass
- Stained glass is gradually expanding in the construction market
- Energy-saving and environmental-friendly building curtain wall glass will become the new darling of the future market
- How refractory materials are used in U-shaped glass furnace
- What are the characteristics of wire U-shaped glass
- Toughened glass manufacturers share their little knowledge of laminated glass
- Difference analysis of tempered glass
- Selection method of special-shaped glass mechanical parts
- Little knowledge about stained glass
- Frosted glass installation process
- Demystifying the difference between tempered glass and ordinary glass
- How to distinguish between ordinary glass and tempered glass
- Can the wire U-shaped glass be used for fire protection
- The application scope and performance characteristics of colored glazed glass
- Why is there a shortage of supply in the development of the tempered glass industry
- Analysis of the technological characteristics of sandblasted glass