What are the installation methods for U-shaped glass?

Check whether the size and flatness of the opening meet the design requirements; checkU-shaped glassWhether there are jagged cracks or cracks on the sides and planes; check the frame size and flatness of the aluminum alloy profile.

U-shaped glass installation

U-shaped glass is generally produced on site and installed in the following order:

　　1. Use expansion bolts or nails to fix the frame material in the opening of the building. The frame can be connected at right angles or angles. There should be at least {{1}} fixed points on each side of the border. The upper and lower frame materials should have 1 fixed points every 400__600.

　 0010010 nbsp; {{1}} nbsp; {{{{3}}}}. In the joint between frame and glass, glass and glass, frame and building structure , Filled with glass glue elastic sealing material (or silicone glue) to seal. The narrow thickness of the elastic seal between the glass and the frame is greater than or equal to {{{{{{{}}}}}}, and the depth should be greater than or equal to 3; the thickness of the elastic seal between the U-shaped glass blocks should be greater than or equal to {{ 5}}, the sealing depth toward the outdoor side should be greater than or equal to 3.

　　3. After the glass is completely installed, remove the dirt on the surface.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 4. When U-shaped glass is put into the frame, the inside of the glass should be scrubbed carefully.

　　5. Insert U-shaped glass in sequence. The depth of U-shaped glass inserted into the upper frame should be greater than or equal to 20, the depth of the inserted lower frame should be greater than or equal to 12, and the depth of the inserted left and right frame materials should be greater than or equal to 20. When the U-shaped glass is inserted into the next piece, and the hole width is not consistent with the glass width, the glass is planted along the length direction according to the 18th 0010010 quot; end glass installation sequence 0010010 quot; At the same time, cut the plastic piece into a length corresponding to the adjustment and put it on one side of the frame.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 6. Cut the stabilizing plastic parts into corresponding lengths and put them in the box Within the upper and lower profiles.

Our company is a comprehensive enterprise integrating glass R & D, manufacturing, sales, design and construction. At present, we have advanced technical service team, mature market channels, good corporate reputation, and can provide customized solutions for customers. . With its integrity, strength, product quality and service, it stands out from the fiercely competitive market and develops steadily.