Everyone is familiar with windows, and every family will install it. Naturally, the use of glass is indispensable. It can price the light in the room, but the paved glass is single, perspective, short and beautiful, and there is no private space. Therefore, frosted glass appears. What about frosted glass? itsFrosted glass installationWhat are the processes?

1. What is frosted glass

It is mainly made of general glass through a series of details, such as mechanical sandblasting, technical grinding or hydrofluoric acid dissolution of glass. It is generally used in places where the usual privacy space needs to be relatively large, such as bathhouses, toilets, offices and other places.

Second, the advantages of frosted glass

　　1, sound insulation function

Compared with general glass, it has better sound insulation, and can effectively reduce the impact of noise on us.

　　2, security function

Compared with the general glass partition, it has a higher safety function, and will not be broken immediately by the impact of external heavy objects, but attached to the film between the glass.

　　3, better protect your privacy

It is not transparent, so it protects its privacy very well, which is the main reason why it is very popular among users.

The process of frosted glass installation:

　　1. The glass door should be installed with care, otherwise it will break if you do n’t pay attention. Mainly, we put double-sided tape on the bottom of the ground rail, and then fix the ground rail in a fixed orientation, pop up a vertical line on the wall according to the design scale, and pop up the spacing orientation on the ground and the ceiling.

　　2, find the main keel, then hit it on the top plate, remember to stick to the ground rail straight, and then make the lower half according to the direction of the spring, and anchor it with the structure of the two ends.

　　3 After the main keel and the ground rail are connected, the next step is to fix the main keel. We can fix it with iron nails, and the keel should be fixed with three nails at each end.

　　4 The fixation of the small keel is particularly important. We can fix it according to the orientation of the dividing line, and fix it with buckles or nails, etc. Remember to install it firmly.

　　5 The glass glue is also a process that cannot be ignored. First of all, stick paper tape around the glass, then hit the glass glue between the glass and the small keel according to the design requirements. tape.

Nowadays, frosted glass has gradually replaced the use of general glass in toilets and office areas. Many of its common strengths have deeply attracted consumers. The above is how the frosted glass is introduced by everyone. Content, I hope you can be helpful to you.