The process of chemically producing a frosted glass installation is:

(1) Cleaning and drying: mainly to produce frosted glass flat glass water to stop cleaning, remove dust, stains, and then dry;

(2) lifting: after cleaning and drying of the flat glass into the hanger, the lifting frame and glass contact with the local tooth-shaped rubber bracket cushion, is vertical emission, glass and glass between a certain interval, with a crane lifting;

(3) Corrosion: with a crane flat glass together with a crane immersed in the corrosion box, the use of customary corrosion liquid immersed glass, corrosion time 5-10 minutes, with the crane lifted, to get rid of residual fluid;

(4) Softening: after the residual fluid, the frosted glass is attached to a layer of residue, put into the softening box to soften, the use of the custom softening liquid immersed glass, softening the day 1-2 minutes, remove the residue;

(5) Cleaning: because of corrosion and softening so that the matte glass body with many chemicals, so it is necessary to clean, the frosted u-shaped glass design into the glass into the washing machine slide, the runway to drive the frosted glass into the cleaning machine, the cleaning machine side sprayed into the clean water, while turning the brush, when the frosted glass is the cleaning machine slide out of the cleaning machine, the frosted glass cleaning ends;

(6) After cleaning the matte glass into the drying room drying, that is, into a single-sided or double-sided matte glass.

The frosted glass appearance is rough, so that the light produces diffuse light without perspective: the light after the matte glass is reflected into the five lakes and four seas (because the frosted glass appearance is not a lubricated plane, so that the light produces diffuse reflection), refracted to the retina was once an endless image, so you can not see what behind the glass. It makes the interior light mild without glare.