U-shaped glass is a type of die-cast glass made of computer-controlled glass furnace, which maintains a constant high quality and accurate size. Due to its high product strength, it is installed in high-rise buildings or large areas where light is required, eliminating the need for additional horizontal or vertical support. Because of its various installation methods, so that the building's lighting, sound proof and noise protection, thermal insulation performance is significant, become one of the new green environmental protection and energy-saving glass.

U-shaped glass is generally installed in on-site production, in the following order:

(1) With expansion bolts or nail to fix the border material in the building hole, the border can be connected at right angles or corners. There should be at least 3 fixed points on each side of the border. The upper and lower frame material should have 1 fixed point every 400 to 600.

(2) Cut the plastic parts of the stable effect into the corresponding length and place them in the upper and lower profiles of the box.

(3) When loading into the frame, the inner glass should be carefully scrubbed clean.

(4) Stab the glass in the back. The depth of the intped frame should be greater than or equal to 20, the depth of the piercing into the lower box should be greater than or equal to 12, and the depth of the box should be greater than or equal to 20. When the glass is inserted into the result piece, the hole width and the glass width is not consistent, then the length direction of the cut glass in the 18th "end glass device sequence" will be loaded, together with the plastic piece stooped and adjusted the corresponding length into the side of the border.

(5) In the seam between the border and the glass into the elastic pad, the pad and the glass and the contact surface of the border shall not be less than 1O.

(6) In the seams of the border and glass, glass and glass, border and architectural structure, filled with glass gel elastic sealing material (or silicone gel) seal. The narrowness of the elastic seal thickness of glass and border is greater than or equal to 2, the depth should be greater than or equal to 3, the elastic seal thickness between The U-shaped glass block should be greater than or equal to 1, and the seal depth towards the outdoor side should be greater than or equal to 3.

(7) The glass is all installed to remove the dirt from the surface.