Frosted glass, also known as frosted glass and dark glass. It is made of ordinary flat glass by mechanical sandblasting, manual grinding or hydrofluoric acid dissolution to treat the surface into a uniform surface. Because the surface is rough, the light is diffusely reflected, and the light is transmitted without perspective. It can make the indoor light soft and not dazzling. Commonly used for doors, windows and partitions in bathhouses, toilets, and offices that require concealment. When using it, the fur should face the window.

The frosted glass door of the bathroom can face the inside of the bathroom or the outside, but it is recommended to use double-layer frosted glass.

It is easy to use frosted glass in the bathroom or kitchen door when the home is decorated. When the matte side is facing in, the frosted glass will become brighter due to water and oil. When the matte side is facing out, the glass will become longer when wet Clear glass, it is also very simple to solve this problem, with double-layer frosted glass, the matte side is facing inwards, whether it is seen from inside or outside is the smooth surface of frosted glass, and also increases the aesthetics of the visual effect. The frosted surface of other frosted glass is not stained with paint. Once it is stained with paint, it is difficult to clean. ThenFrosted glass installationWhat are the methods?

Use double-sided tape to stick to the bottom of the absorption rail, and then put the rail in a fixed position, fix it with expansion plugs and nails, and then pop up the vertical line on the wall according to the planned scale, and pop up the spaced position on the ground and the ceiling. Use the main keel to hit the ceiling, straight to the ground rail, and then make the lower half on the position line that has been popped up according to the drawings, and anchor it with the structure of both ends. Pierce the main keel connector into the ground rail and the main keel, and connect it. According to the planning requirements, fix the main keel with 4-inch iron nails according to the position of the dividing line. The fixing of each end of the keel should be no less than three nails. The device must be strong.

According to the planning requirements, according to the position of the dividing line, use the tenon or nail to fix the small keel, and the device must be strong. Before installing the small keel, the device glass groove can also be opened on the small keel according to the specifications of the ground glass interval of the device. Frosted glass device: Installed on the small keel according to the specifications of frosted glass; if the bead device is used, first fix the bead on one side of the glass, and use a rubber pad to pad under the glass, and then fix the glass with the bead; if the glass is directly fixed with glass glue The glass should be installed in the reserved groove of the small keel first, and then closed and fixed with glass glue.